next-post
Reasons for the popularity of the Eurosof sofa, product modifications
Next article
Reasons for the popularity of the Eurosof sofa, product modifications

Varieties of tic-tac sofas, design features

Varieties of tic-tac sofas, design features

Modern soft sofas are not only aesthetically attractive, comfortable, but also multifunctional. In the usual form, they are used for daytime relaxation, and when unfolded, they are great for sleeping. For the quick and convenient transformation of such furniture, special mechanisms are used, for example, any tick-tock sofa uses a device known as a pantograph or a walking book. Thanks to its simple principle of operation, even a child can cope with the folding, in addition, the design does not damage the floor covering, which is a significant advantage for many users.

Design features

To decide on a model, you need to figure out how the tick-to-tack transformation mechanism works, what it is, and what are the advantages of the device. A simple, convenient fixture can instantly turn a sofa into a spacious, comfortable bed. Furniture can be laid out every day without fear that the pantograph mechanism, which has high resistance to wear, will fail.

When unfolding, the design does not move out on wheels, but as if steps forward in two clicks. Hence the name - “tick-tock”.

Pantographs for the sofa include rods and spring blocks, which allow you to raise the seat and set it on the legs. The rod device of the product quickly forms a sleeping bed, without causing damage to the floor covering. How the sofa “tick-tock” is laid out is always described in the instructions that came with the furniture.

The multifunctional design has a lot of positive properties:

  1. Compact size. Possible placement in a small room.
  2. The simplicity of the folding mechanism - even a child can handle it.
  3. Long service life due to the use in the manufacture of high-quality base.
  4. High strength. The tick-to-tack transformation mechanism in the sofa is quite reliable. Furniture is made from quality materials. Parts for connecting parts of the product are metal or made of hardwood. Therefore, the design easily withstands high loads.
  5. A comfortable place to sit, as the filler is soft foam. The material does not lose shape for a long time even under significant loads.
  6. The presence of additional space. The capacious space inside the structure serves to accommodate sleeping accessories.
  7. Ease of assembly of furniture.

There are also some disadvantages of the tick-to-couch sofa:

  • high cost due to the expensive folding mechanism;
  • wide seat, which takes up a lot of space, which can cause inconvenience.

The cost of replacing a failed folding mechanism is very high.

Despite some of the shortcomings, the convenient tick-to-sofa folding mechanism makes the product very popular and in demand among users.

Tic Tac sofa

 

Sofa with teak-tock mechanism on the side

 

Tick-Tak Transformation Mechanism

 

Muse sofa with tick-tack mechanism

Varieties

Sofas with pantograph "tick-tock" of various types are produced. There are also other names for folding mechanisms: “walking eurobook” or “puma”. All models have distinctive characteristics.

A straight pantograph sofa is a common design that is placed along the wall. Features of the model are:

  • compact dimensions;
  • the ability to accommodate two people;
  • structural strength.

There are variations of such furniture, not only double, but also triple.

An angular sofa with a tick-to-tack mechanism is in high demand among consumers, as it has a number of undeniable advantages:

  • unusual shape;
  • simplicity of layout;
  • high wear resistance.

Such furniture fits perfectly into any interior of the room, without taking up a lot of space.

Pantograph sofa (tick-tack)

 

Corner Sofa Miami 4

Models of sofas are equipped with armrests or are made completely without them. These elements serve to support when a person is sitting, or to place a pillow so that it does not fall during sleep. The armrests are soft or hard. Various materials are used for their production:

  • leather;
  • the cloth;
  • wood;
  • Chipboard;
  • MDF.

The pantograph sofa without armrests looks very nice. Features of such a model:

  • original stylish look;
  • large area for sleeping;
  • safety, in the absence of sharp corners.

In general, the choice of a model with a tick-to-tack transformation depends on the preferences of the buyer, the size of the room, and the number of family members.

Fabric Nairi sofa Corner sofa Sofa Verona

Materials of manufacture

The base of the frame of the sofa with a tick-to-tack mechanism consists of a box, frame and shields. It is made tough, durable, reliable. For the manufacture of various materials are used:

  1. It is possible to use metal, the details of which are tightly connected by electric welding. Such products seem light in appearance, but their design is incredibly durable.
  2. Rack frames are made from solid wood, such as birch, beech, or plywood. A base made of these materials contributes to an even distribution of the load over almost the entire area of ​​the furniture, which provides comfort to a sleeping person.
  3. Often, for the construction of sofas, frames are used from materials containing wood in their basis - timber, chipboard.
  4. Expensive furniture is created mainly from durable solid beech. Russian manufacturers often use spruce and pine to make frames. The main thing is that the wood is well dried - the duration of the operation of the furniture depends on this.
  5. High-quality sofas are obtained, the basis of which is made of multilayer plywood. Such furniture raw materials with the correct manufacturing technology are durable, not deformed. It perfectly holds fittings.
  6. Bearing elements of furniture are usually made simultaneously from several types of materials. This may be a combination of a solid wood beam with plywood, chipboard panels with a beam. Particleboard is not a very durable material for creating a frame; due to its low cost it can be used for budget options for furniture or creating linen boxes.
Rack frame
Reiki

 

Metal carcass
Metal

 

Wood frame
Solid wood with chipboard

 

Products also differ in the composition of the filler. The most common options are:

  1. Bonnel. In this design, all springs are connected to each other by a wire in the form of a spiral, located between two frames made of steel. Due to this connection, the product holds its shape perfectly. The orthopedic effect depends on the number of springs per 1 m2.
  2. Independent Posket Spring Block. Steel springs in this design are made in a cylindrical shape. Each of them is wrapped in a textile case. When the block is pressed, the springs are compressed, and the compression is independent of each other. Thanks to such a system, the product does not sag, does not creak. On 1 m2 there are usually more than 200 springs. Sofa on a spring unit with a pantograph - the product is durable, reliable, withstands high loads. The filler provides a flat surface of the berth, promotes air circulation.
  3. PPU.Polyurethane foam, whose density is 30-40 kg per 1 m2, is also used as an internal component of a berth. PPU, used for the manufacture of sofas, is an elastic, elastic material that does not cause allergies, serves for a long time, maintaining its original condition.

 

 

Pocket Spring - Independent Spring Block
Pocket spring

 

Spring Loaded (Bonnel)
Bonnel

 

Filler polyurethane foam
PPU

 

Tic-Tac Sofa Fill

A wide range of materials is also used for upholstery. The most popular are the following varieties:

  1. Leather. Natural expensive material, has a luxurious look. The most durable and damage-resistant option is patent leather.
  2. Leatherette. With high-quality processing will make a worthy competition to natural material. Artificial leather is easier to care for and its prices are significantly lower.
  3. Flock. Soft, pleasant to the touch, durable, undemanding fabric with a pile.
  4. Tapestry. It is distinguished by the absence of pile, the beauty of the pattern, which is applied by thermal printing.
  5. Velours. Woolen fabric with a pile front. Outwardly resembles velvet.

All fabrics are characterized by high strength, attractive appearance, a variety of colors, ease of care.

Velor artie sofa
Velours
Tapestry Michelle sofa
Tapestry

 

Flock beige Velvet 125
Flock

 

Sofa Royal king from kozhizam
Leatherette

 

Leather sofa
Leather

Product Dimensions

Pantograph sofas are produced in different sizes. Direct-type models with armrests are made with large dimensions. Standard sizes: 105 x 245 x 80, 108 x 206 x 75, 102 x 225 x 85, 100 x 260 x 80 cm. The place for sleeping, which is formed when the furniture is laid out, has a width of at least 150 cm, some options provide a maximum width - up to 160 cm.

Corner models are superior to straight in size. Length is characterized by significant scatter. Common sofas options:

  1. Length - 225, 235, 250, 270 cm, in some models reaches 350 cm.
  2. Depth of seat - varies between 155-180 cm.
  3. The width of the berth is 155 x 196, 155 x 215, 160 x 210 cm.

When buying, you should take into account the area of ​​the room, so that when laying out the furniture does not clutter up the space. The most compact are direct options for sofas without armrests.

Corner sofa

 

Narrow Tic-Tac sofa

 

Sofa bed with tick mechanism

 

Sofa with drawer

Transformation mechanism

Color Options and Decor

Sofas of various colors are produced. In the assortment of any manufacturer, there are certainly classic black, white, gray options. For lovers of pastel colors to choose from pink, beige, peach, lilac shades. Among the bright colors, the most popular are saturated blue tones, fresh green, juicy red, dazzling yellow.

It is important not to make a mistake with the choice of color. The option you like should be in harmony with the interior design of the living room or bedroom.

The sofa comes with pillows that are covered with the same material as the furniture itself. Such accessories, depending on the texture of the fabric, are often decorated with ruffles, frills. So that the sofa does not lose its attractiveness over time, and scuffs do not appear on it, a plaid is used to cover the product. It is represented by various materials, such as acrylic, fur, terry, tapestry, silk, satin.

Double sofa with teak mechanism Beautiful triple sofa with pillows

 

Sofa children's direct

 

Pink sofa

 

Sofa eurobook with tick-tock

Popular manufacturers

Sofas with a tick-to-tack mechanism are produced by a huge number of factories, both Russian and foreign. The most popular manufacturers are:

  1. Parma. Perm furniture factory, produces high-quality sofas "tick-tock."
  2. "Weasel". The company is located in the city of Kirov. Engaged in the manufacture of durable, beautiful furniture.
  3. "Marrakesh". Glazov factory producing furniture. She has a 75-year history, extensive experience in manufacturing modern functional sofas.
  4. Ardoni. Ulyanovsk furniture company, produces elegant stylish furniture.
  5. MDV. The manufacturer is located in Vladimir, creates comfortable tic-tac sofas with a high-quality pantograph.
  6. "Master Furniture". Moscow factory of sofas, is engaged in the manufacture of various models - stylish and modern.

Among the variety of such upholstered furniture, it is difficult to choose the appropriate option.Given the area, the interior of the room, your own taste, you can find an option that will add a little comfort, coziness, attractiveness to the room, create an individual look. The mechanism of folding the pantograph sofa will make the process of transforming the structure into a sleeping place quick, simple, easy.

Comfortable sofa from Master Furniture
Master Furniture

 

Seattle by Ardoni
Seattle sofa ardoni

 

Eurobook Marrakesh
Marrakesh

 

Sofa Tic-Tac from the manufacturer Weasel
Weasel

 

Sofa Parma
Parma

 

Sofa MDV Tibet
MDA

Video

A photo

Link to the main publication

Sofas

The beds

Cabinets