prev-post
Overview of built-in corner cabinets, and their features
Previous article
Overview of built-in corner cabinets, and their features
next-post
The steps of making a built-in closet with your own hands, everything is in detail
Next article
The steps of making a built-in closet with your own hands, everything is in detail

Making a built-in cabinet with your own hands, useful tips

Making a built-in cabinet with your own hands, useful tips

If you have a small apartment, where there is not enough free space for placing things, wardrobe items, it’s worth making a built-in wardrobe with your own hands, you can remodel niches or openings in the walls in Khrushchev, or equip an attic for a wardrobe. This will save space, which is not enough, and money. Of course, this lesson is rather laborious, but having prepared correctly, you can create or remake a really convenient built-in design.

Project drafting

When making a built-in cabinet with your own hands, the first thing you need to think about is drawing up a diagram, calculating the required materials. In the calculation, all the nuances should be provided so that the use of finished furniture is as efficient as possible. It is worth considering where cabinets, shelves, hangers and other elements will be located for convenient use of the cabinet. An important advantage of the built-in cabinet for Khrushchev owners is the possibility of installation “for themselves” in order to maximize the use of all free space with lockers, select the optimal shelf sizes, and choose the location of all the elements.

It is better if closer to the ceiling rods for trempels will be built in, this will make it possible to use the cabinet space from the top with advantage. A sufficient distance between the shelves for clothes is up to 40 cm. If you plan to build in a TV, music center or other equipment in the future, you should allocate a place. If you make built-in kitchen furniture, think about the oven in advance. She will need a special place.

Be sure to make drawings, where you can clearly see how the built-in furniture will look. If there is no proper experience in compiling them, you can find ready-made projects for the calculation, manufacturing of embedded structures with drawings below. It shows in detail how to make a built-in cabinet with your own hands in Khrushchev, as well as specialists who are familiar with cabinets, or home craftsmen who have already done the calculation when they built the kitchen for a new oven in the country or did a do-it-yourself corner cabinet give useful tips. There will also be photos of finished converted projects. You can use the help of computer programs to design a built-in closet with all the smallest details and diagrams.

Important design features:

  • depending on whether the walls are even, the ceiling in the place where the cabinet is planned to be built, the front of further work is determined. It is necessary to exclude all surface irregularities so that the structure is stable and does not collapse;
  • all accessories should be of the same style and color, located at the same distance from each other;
  • too long panels should be avoided. They are quite difficult to install, they can sag over time;
  • great attention should be paid to the floor. Its surface should be smooth and solid. Parquet or linoleum will not be able to withstand too heavy furniture, and the laminate will go in waves;
  • when installing all the elements, it is necessary to take into account that large parts of wood will expand by a couple of millimeters due to moisture, so small gaps should be left between them.

If you plan to add glass or mirror elements to the attic cabinet, it is better to use a special protective coating. It will help protect parts from scratches during use.

Designing a closet using a special program

Sliding wardrobe drawing

Cabinet drawing

Narrow cabinet layout

Design of a wardrobe

Material selection

Material plays an important role when we plan to make a wardrobe or remodel kitchen furniture for a new oven. Such parameters as strength and durability of the built-in design are taken into account. The most popular are wood, drywall, wood-containing boards. The pros and cons of each material are shown in the table.

Material Advantages disadvantages
Solid wood
  • differs in attractive appearance, high durability;
  • with proper care will withstand a long life;
  • Suitable for any interior.
  • not suitable if you want to integrate the cabinet into a niche, because the humidity in the niche is too high. From this, the built-in furniture will very quickly lose shape;
  • wood processing requires a certain tool and the skills of working with it from a home master.
Drywall
  • the most budget option;
  • it’s easy to work with him;
  • it is possible to make curved elements, angular structures without difficulty and any special skills;
  • Fits into any interior.
  • do-it-yourself drywall cabinet is very fragile, low strength;
  • requires additional strong support.
Wood-based boards
  • a wide variety of materials, colors and textures;
  • affordable cost;
  • high strength;
  • they are not afraid of moisture, they are easy to work with.
  • of them you can’t make various curly elements.

To avoid the negative effects of moisture on a natural tree, you can treat it with drying oil or a special emulsion.

When choosing a material, one should also take into account in which room the cabinet will be used and under what conditions:

  • the built-in drywall cabinet cannot be installed in places with high humidity and with significant temperature differences. For example, near the toilet, in the kitchen where the oven is built-in, or in the attic;
  • MDF and chipboard are considered a universal option. They are suitable if you plan to make a closet in the toilet with your own hands in Khrushchev, where there is always not enough space, they make excellent built-in kitchens where you can install an oven, also ideal for a summer house or an attic;
  • wood is best used for living rooms or bedrooms. It looks luxurious and presentable in any interior.

If we are talking about a small room in Khrushchev, you can think about the design of a corner built-in wardrobe. When arranging an attic house, for example, if it is a summer residence, the angular location will also be very convenient.

Drywall for furniture
Drywall
Solid wood for furniture
Solid wood
Particle Boards
Chipboard

Preparation of parts and tools

After you have decided on the design, filling, materials used, you should once again look at the diagram and think about whether you took into account all the nuances before manufacturing. Will you need to add shelves or cabinets, will there be enough space in the cabinet. Before proceeding directly to the construction work, you can watch a video about built-in wardrobes with your own hands, which other home craftsmen have already done. This will help you determine the sequence of upcoming work, the calculation of a particular material and tool.

It is necessary to prepare the details for:

  • doors;
  • wheel guides if doors will open according to the principle of a sliding wardrobe;
  • back and side panels, if you install them;
  • roofs;
  • shelves for clothes and shoes;
  • tremp bars;
  • fasteners.
Furniture Assembly Parts
Details

As the back, side panels, floor, elements of the room can be used if the walls are quite even. This will help to significantly reduce material costs. In this regard, new buildings are much more convenient, compared with the Khrushchev. If on the walls there are defects, bumps, it is better to use a separate structure, which should be attached to the wall. As the back panel, a lighter and thinner material is usually chosen, since the back side is not a carrier.

If we are talking about a closet, it is necessary to lay a solid floor in it so that the structure is even and the parts do not wear out quickly. If the cabinet is built into the wall or in the place where the niche was, you can leave the floor of the room, but it should be flat, covered with suitable material.

As for the tools, they should also be taken care of in advance so that the process of embedding the cabinet is not delayed. For work you will need:

  • level, square;
  • pencil, awl, sharp knife;
  • drill with necessary drills, screwdriver;
  • hacksaw for metal.

The set of tools will differ depending on the selected materials, design and features of the cabinet. The preparation of parts should begin with the calculation and cutting of sheets into parts. To do this, draw the necessary elements with a margin of 3-3.5 mm. If there is not enough experience in repairing, working with cutting tools and built-in cabinets, you can order sheet cutting in a specialized workshop or store. There they will do it quickly, efficiently, strictly according to your size. After all the parts are cut into elements, it is necessary to cover the edges with a PVC film.

The final preparatory work is the choice of fittings. This includes handles for doors, sliding shelves, trempels, hooks, Euro screws with plugs.

A set of tools needed to make a cabinet
Instruments

Sequence of fastening all parts

A built-in cabinet, made by yourself, allows you to maximize the use of available space. If there is such an opportunity, elements of the room are used as the bottom, roof, side, rear walls. It is rarely possible to integrate a cabinet into a wall without both side walls, this is only possible in a niche or when designing furniture along the entire length of the wall. In any case, this opportunity to save is worth taking advantage of.

The entire assembly process of the structure can be divided into the following stages:

  • mark out future holes for mounting screws. In other words, they transfer the drawing to the wall where the furniture is designed. This is a very crucial stage, requiring maximum accuracy;
  • first set the bottom, and then the walls of the cabinet;
  • after the main frame is built in, the back wall is installed and the upper shelves are fixed, this will make the built-in structure more rigid;
  • install the roof - even when making a cabinet under the ceiling, you must still leave a gap of at least 7 cm, otherwise you will not be able to fix the "Euroscrews". In any case, you will not be able to use a screwdriver here, just tighten the screws with your hands or pliers, and tighten with a wrench or a "ratchet";
  • mount the side shelves with the help of "Euroscrews" or corners, 4 pieces per shelf. Set rods for trempels, boxes;
  • the last thing is the assembly of doors. Here, the sequence of actions depends on the choice of the type of door - sliding or swing.
Installation location
Preparation of the installation site and drawing development
Frame mounting
Frame preparation and fixing
Frame frames
Fastening the frame frames of the future cabinet
Drywall Preparation
Drywall Cutting
How to fix drywall
Drywall Mount
Putty process
Putty
Shelf Details
Shelf Material
Shelves and guides
Mounting shelves and rails

Door mounting

The installation of doors is one of the most important stages in the assembly of a built-in cabinet, since it is the doors that represent the facade of the entire structure. When installing swing doors, you may encounter the following difficulties:

  • if you did not install the side panels, but used the wall of the room instead, it will be very difficult to insert elements for furniture hinges;
  • An additional tool for drilling large blind holes may be required, not every home master has such a milling cutter.

If you plan to install sliding doors, it is easiest to fasten the rails for them using self-tapping screws, and fasten the rollers to the doors themselves. If the floors and canvases are fairly even, there will be no installation problems.

Depending on the material the door is made of, additional cladding may be required. It can be self-adhesive, PVC film, colorless varnish, etc.

Self-installation of doors for a sliding wardrobe will require maximum attention and accuracy. Often this design is complemented by a mirror blade for maximum ease of use. First of all, a back door is installed, for this you will need screws, screws, rollers, corners, a sealant. Fasten the running profiles from above and below. Set the profile of the handle, the corners from the bottom on both sides, running rollers. Similarly fasten devices for the front door.

If you plan to install a mirror, you must use a sealant along the entire length of the profile; if it is planned to insert a chipboard - a sealant is not needed. Lastly, the doors themselves are installed in the grooves of the profiles, and the contents of the cabinet are equipped with trempels, baskets and other useful storage elements. Doors should close and open smoothly, without jerking, unnecessary sounds.

If all stages of manufacturing a built-in closet are performed as accurately and accurately as possible, then repairing built-in closets will not take very long, and the design itself will bring only convenience and will help to keep order in the house. A better understanding of how a built-in closet is made with a do-it-yourself video will help. Having better studied the process of how the installation occurs, you do not have to redo anything and everything will work out the first time.

Door coupe
Installation of a door of a compartment

Video

Link to the main publication

Sofas

The beds

Cabinets